401-HP 2013 Honda Accord Coupe Among Three Accords at Honda’s SEMA Display Read more: http://wot.motortrend.com/401-hp-2013-honda-accord-coupe-among-three-accords-at-honda-sema-display-283845.html/0/#ixzz2Ap784k3R


Written by:

The HFP package for the 2013 Accord Coupe features a bodykit with front, side, and rear pieces and deck lid spoiler, a sport suspension that lowers the midsize coupe 0.6 inches, 19-inch alloy wheels, as well as badges on the trunk lid and front fenders. Inside, HFP floor mats and red interior lighting complete the package. Only 500 examples of the $4650 HFP package (price excludes installation) will be available for the 2013 Accord Coupe next spring.

Bisimoto Engineering 2013 Honda Accord Coupe Grand Touring

Bisimoto Engineering has boosted the output of the 2013 Honda Accord Coupe’s V-6 engine from 278 hp to 401 hp with a Nitrous Express (NX) nitrous oxide kit and Bisimoto cat-back exhaust system with Burns Stainless mufflers. The coupe’s suspension has been updated with new coil springs and sway bars while a roll cage has been added to stiffen the chassis. Buddy Club supplies new brake calipers and rotors as well as 19×9.5-inch alloy wheels wrapped in 245/40/19-inch rubber.

2013 Honda Accord Coupe V6 Bisimoto Engineering Grand Touring wheels 1  300x187 imageThe exterior of the Accord Grand Touring concept was designed by Denmatic and features a Gatorwrap exterior body wrap that covers the HFP bodykit. Inside, occupants sit in Bisimotwerks GT3 racing seats.

Here is the full list of modifications to the Bisimoto Engineering 2013 Honda Accord Coupe Grand Touring:

Powertrain Modifications:

  • Nitrous Express (NX) wet shot chemical supercharger system
  • NGK Iridium spark plugs
  • PurOl “Elite Series” Synthetic Motor Oils
  • Bisimoto Cat-back exhaust system
  • Burns Stainless mufflers
  • Bisimoto 360 degree Oil Cap

Chassis/Suspension Modifications:

  • JNF Chromoly roll cage
  • Progress coil suspension and sway bar
  • Buddy Club: P1 Racing II Plus 19×9.5 aluminum wheels, P1 Racing lug nuts, Racing Spec Monoblock Calipers, Racing Spec Brake Rotors
  • Falken Azenis FK453 245/40ZR-19 tires

Exterior Modifications:

  • Gatorwrap custom laminated body wrap
  • Bisimoto: Accord GT Decal Pack kit, Accord GT Ghost Emblem Kit
  • Denmatic design scheme
  • HFP body kit side skirts, rear and front fascia kit
  • Carbon Creations GT Concept 2 Wing

Interior Modifications:

  • Bisimotowerks: GT3 racing seats, Leather wrapped and hand stitched roll cage, reservoir socks
  • G&J braided lines

2013 Honda Accord Sedan by DSO Eyewear/MAD Industries

2013 Honda Accord EX sedan by DSO Eyewear and MAD Industries left front 1 300x187 imageDSO Eyewear and MAD Industries created this 2013 Honda Accord EX sedan, which is powered by a 2.4-liter four-cylinder mated to a CVT. An Eibach Pro-Kit lowering springs reduce the Accord sedan’s ride height by 1.0 inch in front and 1.5 inches in the rear while the dual exhaust from a 2013 Accord Sport enhances engine breathing. The Accord sits on 20×8.5-inch Mallory alloy wheels with a matte black finish from TSW Wheels wrapped in 255/35/20 tires

The exterior wears White Orchid Pearl paint with a Matte Blue Metallic wrap from 3M and a Honda X-Package body kit. Inside, Katzkin Leather covers new seating surfaces, door trim, the pillars, and the headliner. Matching 3M wrap also covers select interior pieces. Lightning Audio amplifiers and speakers enhance the Accord’s sound system.

Here is the full list of modifications to the 2013 Honda Accord Sedan by DSO Eyewear/MAD Industries:

Genuine Honda Accessories:

  • X-Package body kit
  • LED illuminated stainless door sill trim

Powertrain Modifications:

  • K&N air filter
  • AMSOIL dominator motor oils
  • Odyssey extreme battery
  • Dual Exhaust System from 2013 Accord Sport model

Chassis Modifications:

  • Eibach Pro-Kit Performance Springs 1.0-inch front/1.5-inch rear
  • MGP: custom satin black caliper covers

Wheel & Tires:

  • Falken AZENIS FK 453 255/35ZR20 tires
  • TSW Wheels: Mallory Alloys Matte Black Wheels 20″x 8.5″

Exterior Modifications:

  • 3M 1080 Scotchprint Wrap Film: Matte Blue Metallic Personalized Vehicle Graphics
  • Sticky Fingers Design: installed the Matte Scotchprint wrap
  • BASF RM Onyx HD waterborne: DC5800 Clear coat
  • PIAA: Extreme White Bulbs, fog lamp

2013 Honda Accord EX sedan by DSO Eyewear and MAD Industries cockpit 1 300x187 imageInterior Modifications:

  • Katzkin Leather Interiors: Midnight Tuscany Leather with Raven Black Perforated Suedezkin inserts appointed with Cream Bone Accent Suedezkin seat insert with matching contrast stitching; Bone Suedezkin with Tuscany accents in door panels inserts; Headliner, pillars, package tray covered in Bone and Raven Black Suedezkin
  • 3M Wraps Interior Parts: Exterior matching 3M Scotchprint Wrap Film on trim pieces.
  • Lighting Audio: LA-4100 4 Channel Amplifier (800-watt), LA-1654 series full-range separates, LA-400 mono amplifier (400-Watt), LA-S410 10″ Shallow Sub Woofers, Premium Speaker wire.
  • LED Dome Light Bulbs

Miscellaneous Modifications:

  • SRP Racing pedals: Billet aluminium anodized racing pedals
  • Escort Inside: 9500IX Radar-Laser-Safety Camera- Detector
  • Coverking: Stain Stretch custom interior car cover
  • Signature Wheel and Tire: Provided mounting and balancing
  • Enfotrace: GPS Tracking System keeps tabs of the location in real-time online via interactive tracking system
  • Mothers: Polishes – Waxes – Cleaners

Source: Honda

Louisville Kentucky Honda Dealer

Bob Montgomery Honda

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: